Description
|
|
|
|
|---|---|---|
Stud ModeThis stud mode has three depth stud scanning chooses. The deepest scan mode scans up to a maximum depth of 1.5 inches (38 mm). DeepScan mode is a sensitive scanning mode that should be used when there are additional layers for wall panels and panels. To minimize false alarms or other objects behind the wall that may not be studs. Always start scanning at a resolution of 0.5 inches(12.7 mm). Second 1 inch(25.4 mm). The last use of 1.5 inches(38 mm) scanning mode. |
Metal ModeUse method the same as StudScan mode. |
Wire Warning DetectionWire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detects and indicates the Live AC Wire Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected. |
|
|
|
|
|---|---|---|
Step 1:CalibrationImportant notice:Calibrate before scanning Please insert a 9V Battery(included). Press Power Button to turn on the device. Put it on the wall where you want to detect and choose the Scan Mode, then press the scan button to start calibration. The decreasing bars will disappear and the buzzer will beep one time and the calibration is completed. |
Step 2: MovingThen move the stud finder along the wall slowly If shake or lift the stud finder by accident, the device needs to re-calibrate. The bar on the screen raises with the beep signal alter, it means the device is close to the AC wire. |
Step 3: Find the AC WireWhen the signal bar is full and the beep alarm is loudest, it means you have found the AC wire. Mark it with your pencil. |
The most accurate and higher safety – stud detector is specially designed! The most advanced sensor technology is used to accurately and quickly locate the metal pipes fire lines studs wooden frames steel bars and supporting beams hidden behind walls floors and ceilings Whether you are a professional homeowner or DIY enthusiast you can find a good use in this electronic screw scanner
The wall scanner includes five different scanning modes suitable for metal tubes fire lines studs wooden frames steel bars and brackets as well as ceilings deep embedded objects behind walls The bolt mode can detect wooden beams and joists in the dry wall up to 1 5 inches Metal mode can detect up to 3 inches of pipe Depth mode detects up to 3 inches of wood and metal components while 85 to 240 volts of AC current can be used for up to 2 inches of voltage and live wire
Auto-calibration and ergonomic grip comfortable to use before testing please hold down the scan button for 1-2 seconds Auto-calibration provides maximum reliability and accuracy for users The ergonomic design of this wall stud detector enables it to be fixed from any angle
LCD screen upgrade design display the required stud material and the exact position of the stud – Digital stud scanner with large LCD display and loud warning can detect the exact position of the object When the material is found the LCD display will beep to tell you if you are close to the target Fast detection saves time and energy for users and makes task completion easier
Graphic liquid crystal display multi-functional wall scanner detector has a graphic liquid crystal display which can display many prompts in detection such as detection mode signal strength automatic calibration battery indication and maximum readability When the battery power is insufficient it will display the indicator icon of insufficient battery power reminding you to replace the full battery in time New 9 Volt Battery
Reviews
There are no reviews yet.